Router Forums - View Single Post

jeff12002 · 03-23-2005, 10:56 PM

With regards to the stots jig, look closely at the jig. The taper on the tapered fingers is 8 degrees, just like the 8 degree bit you use with the other side of the template. A 7, or 9 degree bit with this jig, will not produce tight fitting joints.

03-23-2005, 10:56 PM	#6
jeff12002 Registered User Join Date: Mar 2005 Posts: 36 View jeff12002's Gallery	Report This Post! With regards to the stots jig, look closely at the jig. The taper on the tapered fingers is 8 degrees, just like the 8 degree bit you use with the other side of the template. A 7, or 9 degree bit with this jig, will not produce tight fitting joints.
	Top - Reply with Quote