Terry, thanks for the cudo's on the jig!
Oh, I guess occasional isn't a very good description.... I just don't get as much time in the garage as I would like sometimes but I'm sure that's true for most of us! As far as "sneaking in", I have, I looked a quite a few, but they all use a different combination of bit & bushing sizes which doesn't help much and catalogs don't give very much info or have good enough pictures to use as a guide. I would like to be able to use the bits & bushings I already have. I'm sure I could come up with something that would work after LOTS of trial N error tries but I'd rather go off of plans of measurements that I know will work the first time. I took me 4 or 5 tries to get the spacing correct on the one I just built and I used my machinist calipers too. I did send a msg to the people at "Woodsmith" inquiring about additional template plans but have not got a reply yet. I'll let you know when I do.
Thanks again cudo's and for responding. Talk to you soon I hope!
__________________
Take care, Dominick |