 Hoizontal Router Table
This is a table I put together over the weekend. Some parts are a little primative and still needs some fine tuning. But it works and was made out of stuff I allready had lying around the garage. The 3/8" threaded rod I used for "fine" adjustments might get changed as a full turn only moves it 1/16". On top of the table is a push block I also made this weekend. I got the pattern for the handle out of magazine and also made one for my old homemade coping sled. I had some left over non-slip shelf liner (like a router mat only thinner) that I glued to the bottom of the push block. Works really good.
First time adding pics, hope it works.
Rusty |