Nice job Rusty
Just a note about the "full turn only moves it 1/16"" that's just about what you want when you are making panels and slots....once you know for sure what ea. turn will do you now have quick gage to go by and 1/16" is a big deal when it comes to panels or slots.
Great ideal on the non-slip shelf liner, I for one will tell (ask
) my boss to pick some when she out Walmart shopping ...
,I just now put it on my want list for the boss along with some 3M clear shipping tape.
That's what neat about this forum you can pickup tips all the time.
Nice job on the sled
, here's a tip, use some of the same black plastic stock when you go to make the bead cuts, just stick a 6" wide x 18"long, stick it down to the table top,(with Doub,Side Carp.Tape(3M) in this way you don't need to reset the router height the norm, just pop in the bead cutter and cut the stiles, rails, for the doors,if you are using a match set of cutters (the norm) they should come out right on the button.
Just a NOTE ****
Looks like you just saved 189.00 bucks or so
see link below...now that's the neat part of wood working....
http://www.mlcswoodworking.com/shops...horiztabl.html
===========
If you want to make your own here's a link that will help with that.
http://stores.ebay.com/8020-Inc-Garage-Sale
=============
Have a good one
Bj