Doug,
Thanks for the reply. I will probably try to make a template from (maybe a piece of 1/4 inch masonite), then I'll clamp the template and workpiece together, then using a chamfering bit with a wheel, I'll run the router by hand to cut the pattern into the workpiece. My only concern is whether a standard router might be too heavy when used on 1/4 inch material. If that's not the case, then I'll do it that way, otherwise I'll use the palm router. I don't have either a standard router or a palm router now, and that's why I'm asking which one to get for this job?
Louis |