Router Forums - View Single Post

**bobj3** · 09-05-2006, 07:07 PM

Hi pkowzan

I'm almost sure you will need to drop down to a 1/8" shank size to get what you want.
Here's one web site for you to check out

http://www.grizzly.com/products/g7950

Below is just a standard 1/8" set,but no 3/32"
http://www.grizzly.com/products/h0880

Just a NOTE *** this is the router table I use when I use the small 1/8" size,it works great for the small ones

I also use my VS Dremel tool, when I run the router bits,the Dremel turns to fast and will burn the bits up otherwise.

see snapshots below... ▼

Bj

09-05-2006, 07:07 PM	#2
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,266 View bobj3's Gallery	Report This Post! Hi pkowzan I'm almost sure you will need to drop down to a 1/8" shank size to get what you want. Here's one web site for you to check out http://www.grizzly.com/products/g7950 Below is just a standard 1/8" set,but no 3/32" http://www.grizzly.com/products/h0880 Just a NOTE *** this is the router table I use when I use the small 1/8" size,it works great for the small ones I also use my VS Dremel tool, when I run the router bits,the Dremel turns to fast and will burn the bits up otherwise. see snapshots below... ▼ Bj Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 09-05-2006 at 08:31 PM.
	Top - Reply with Quote