Router Forums - View Single Post

**bobj3** · 09-21-2006, 10:42 AM

HI Joe

This is what I would recommend,then buy one at a time as you need them.

Spiral Upcut/Downcut Starter Sets
http://www.mlcswoodworking.com/shops...olid_sets.html

Spiral Flush Trim Bit
http://www.mlcswoodworking.com/shops...ushtrim_anchor

Round Over Bit, #8655 1/2" at $17.00
http://www.mlcswoodworking.com/shops.../bt_rndvr.html

The bits and set of Brass Bars From Oak-Park or MLCS and your set to put your router to work.

And a real plus is the free shipping and if you play it right you can get a 10% off the total (From: MLCS) by putting in a code like C09,C10,etc..

----------------

flute flat bottom cutters.
Top quality micrograin solid carbide.
Will cut faster, smoother and stays sharper longer.
Produces a very clean, fast and accurate cut with minimal chatter.
Upcut spiral helps remove material. Ideal for making mortise and tenon joints.
Downcut spirals help hold the material in place while using handheld routers.
Will plunge cut and plane edges.
Eliminates chipping at the top of the cut. Ideal for soft & hard woods, plywoods & composites.

Bj

09-21-2006, 10:42 AM	#2
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Colorado U.S.A. Posts: 7,020 View bobj3's Gallery	HI Joe This is what I would recommend,then buy one at a time as you need them. Spiral Upcut/Downcut Starter Sets http://www.mlcswoodworking.com/shops...olid_sets.html Spiral Flush Trim Bit http://www.mlcswoodworking.com/shops...ushtrim_anchor Round Over Bit, #8655 1/2" at $17.00 http://www.mlcswoodworking.com/shops.../bt_rndvr.html The bits and set of Brass Bars From Oak-Park or MLCS and your set to put your router to work. And a real plus is the free shipping and if you play it right you can get a 10% off the total (From: MLCS) by putting in a code like C09,C10,etc.. ---------------- flute flat bottom cutters. Top quality micrograin solid carbide. Will cut faster, smoother and stays sharper longer. Produces a very clean, fast and accurate cut with minimal chatter. Upcut spiral helps remove material. Ideal for making mortise and tenon joints. Downcut spirals help hold the material in place while using handheld routers. Will plunge cut and plane edges. Eliminates chipping at the top of the cut. Ideal for soft & hard woods, plywoods & composites. Bj __________________ Workshop Projects Router Tables plans FREE, plus more http://www.absolutelyfreeplans.com/W...p_projects.htm RW Router Tip Archive www.routerworkshop.com/router_tip_glossary.html Floating Mortise & Tenon: A strong and Silent Joint Last edited by bobj3; 09-21-2006 at 11:22 AM.
	Top - Reply with Quote