Ok, Gilbear started this thread looking for a way to plane boards with a router. I saw a couple good posts on jigs for that purpose. Sanding devices were suggested as an alternative, and that is all good. This post drifted into a different topic and that makes for confusion. The sanding drums and belts, the jigs and such really belong in a different catagory. To avoid confusion lets all make an effort to be sure information is posted where it should be.
Angus, you are absolutly correct. There is a lot of confusion when old posts are pulled up and revived months or even years after they were posted. Perhaps a time limit should be applied to the life span of a post, at which point it should be locked. This is a subject for a different area and I will open a thread for discussion there.
__________________
Mike
Please edit your profile with a name and location so we can better assist you. |