Hi Bruce
Ok Now I know what you are doing
You will need to move the fence back just a bit about a 1" or so.
Get your masking tape out and put some on the fence for a start mark and a stop mark.
This is tricky with out taking off a finger or two.
Fire up the router and move the stock to the start mark and push the stock in to the bit and move it to your left to the stop mark, pull the stock away from the fence, to you ,hold on at all time to the stock.
Then turn the stock and do the other 3 sides.
You can used a wooden clamp ,to hold the stock if you want to, this will help hold it to the router table top and keep it flat and keep your fingers out of the way.
Bj