Hi Corey
That's a hard one ,,,,,the Planer in your case ,Grizzly or the Dewalt or Delta
list of all 3 makes below ▼ I have the Grizzly and it's great for what I do .
http://amazon.com/s/ref=nb_ss_gw/002...3&Go.y=5&Go=Go
The reviews are good on the Grizzly and the Delta- plus it has free shipping that's a plus,about 240.oo on both.
The real key to a Planer is the Dust Collector Hood,get the chips out so they don't run over and over and they will chip the blades if you don't , I have two sets of old blades and it took me a long time to get that hint down
.
Just a NOTE *** I got the Grizzly because of the rollers on the top,it's a pain to walk around the machine with the stock under your arm and the rollers on the top will let you roll the stock over the top and send it for one more pass, it's not to bad for short stock but 4ft and longer it's a pain in the butt,it can take 10 or 20 short walks to get it down to the right size and if you are doing a stack well, when your done with your little walk it's break time.
Bj
