Thanks Mike, actually I had bought a Rousseau insert and a Router Raizer, jumped the gun is what I did. By the time you add up the costs plus the fact of drilling out my plunge base etc dollar wise the really wasn't all the far away from the cost Of the quick lift.(199.00). That said is just looked like a much more stable and accurate system going with the lift and for smaller jobs on site I still have both bases available. Most of my on site work was edging or laminate trimming anyhow. The QL-350A-RS replaces the Rousseau plate but it does not have the snubbers or the levelers. Only the QL-350A has them. |