Hi lablover
Here's some snapshots, they will help, from the old cat. from sommerfeld tools.
click on the snapshots to blow them up (hit the F11 key 1st) so you can read the details.
You can also put them on your PC ,just view them and then right click on them and select copy image or save as then make a new folder on your desktop and paste them in, then you can print them out or just save them when you need to go back and check on a item or two.
NOTE**** You don't need to buy the templates
you can make your own quick and easy,,,, use some 1/4" to 1/2" thick MDF or hardboard take your compass and draw a BIG cir. on the 14" wide stock that's about 8" to 10" long, then take it to the band saw and cut it on the line, then light sand the edges, then take a magic marker and mark them for 10" to 12" panel doors. mark them part A and part B , you will need both parts to make the panels and the frame parts.
Start your cir. about 4 1/2" down from the left and the right side of the top of the 14" wide board.
Put in a band saw slot for the center mark,,,see snapshot below
Bj