Quote:
|
Originally Posted by kensb Pine |
If it's green, you will see some, the pitch is cooking so to speak.
But take less of a cut that may help....but take a good look at the bit to see if the Pine pitch is building up on the bit.....if so clean it....
Note*** you don't need to run at 24,000 rpm take it down to 12,000 rpm this can help keep the bit run cooler....speed = heat and kills almost all things .....
besure you are moving the stock over the bit the right way, into the bit...
Table top, it's turning couterclockwize so always left to right with the stock.
-- Fence --
=================
◄ ☺ ◄ ◄
Bj