Very nice job and thanks for sharing Corey
Now that you posted it, I was thinking that actually I have 2 trimmers just sitting and collecting dust so why I did not do it till now.
So, it's going to be a project.
I think that I'll use a 3/4" plywood, cut a hole a little bit bigger than the trimmer base and screw on top of the plywood...Floor panels [they are already covered with plastic laminate (Formica)].
I think that I'm just going to screw the plywood on one of the Workmates.
I'll cut a hole in the floor panels to fit the trimmer insert.
The insert will be also a piece of floor panel so no height adjustment is needed, just 4 screws to the plywood and go.
The other option will be, to screw the trimmer directly on the floor panels without any insert.
Thanks
niki |