Router Forums - View Single Post - Another roller - this time, Hold-down rollers

simplenik · 06-09-2007, 05:57 PM

Good day

Same idea like the "Feeder rollers", because of the roller angle it pushes the board toward the fence.

Later I made it with two rollers, one before and one after the blade.

With both the feeder rollers and the hold-down rollers, the cutting of those 1¼" thick and 6' long Oak boards was never so easy...and safe...

Regards
niki

06-09-2007, 05:57 PM	#1
simplenik Registered User Forum Geek Join Date: Feb 2006 Posts: 228 View simplenik's Gallery	Report This Post! Another roller - this time, Hold-down rollers Good day Same idea like the "Feeder rollers", because of the roller angle it pushes the board toward the fence. Later I made it with two rollers, one before and one after the blade. With both the feeder rollers and the hold-down rollers, the cutting of those 1¼" thick and 6' long Oak boards was never so easy...and safe... Regards niki
	Top - Reply with Quote