Harry
it took me a minute to see the wrench that you have clamped in the vise to support the collet...that's a real good idea.
Toni
If you don't have a vise you could just clamp the wrench to a table top, or even just lay the wrench across a couple of blocks and it should work as well.
Greg
Quote:
|
Originally Posted by harrysin I'm not familiar with you're particular router Toni but I find that 1/4" cutters frozen in the collet are common, the staged photo shows how I remove them. As a matter of interest I had remove this one using this method! A most important point to remember with this method is to hold the cutter!!!! |