Thank you
Joe
What I did not tell is that the runner is narrower than the miter slot by 1 mm (3/64") so it will never bind or get stuck.
The square is between the runner and the "sled fence" and because the runner is parallel to the blade and tight to the miter slot, it will remain square all the time.
The rollers are just pulling the runner tight to the miter slot (they don't have any role in the sled squareness) and as long as the runner is tight to the miter slot, the sled remains square.
What I meant by "Can be re-adjusted in seconds" is (sorry for my poor words selection)...if the runner becomes loose (side play) I can re-adjust it tight within seconds by tightening the bolts.
I have it all in a 56 pictures of "Step-by-step" WIP and if you want to see some detail I can post a few pics.
niki |