Here's how my jig works..
A= top dimension
B= bottom dimen.
C= 1/2 difference of B-A
D= height of side
If I use A= 4" and B= 6", C= 1"
Cut the side pieces 6" by D (I make them 24")
Put that piece in the jig at #1 position and cut on table/bandsaw with E on the fence.
Turn the piece over and place at #2 position. Make the second cut. The top is at the bottom of the jig.
Last edited by AxlMyk; 06-17-2007 at 12:37 PM.
|