 Cabinet scraper
Okay I did it but, one instruction sheet I found on the net said to put a 45 degree angle on it. So I did this on a wet wheel and it got razor sharp and I found out that a 45 degree angle would only be on one side. Well it was too late to do it over so I flipped it over and cut another 45 on the other side. I put it in a vise a drew a burr with the flat part of a chisel. I did this a few more times on both edges and got a good hook. It works good. Maybe I'll be daring later and grind the edges flat and start a 15 degree grind so I can draw a burr on all four edges. LIVE AND LEARN!
g-man |