Just some snapshots of the Vac.pickup for the Incra Jig on a the small router table,,,this jig can be removed with two small wing nuts if needed
It's made with some 1/2" MDF 2ea. 10-24 x 1" carr.bolts,2ea. flat waskers,2ea. 10-24 (3/16" ) wing nuts...1" x 2 1/2 plastic apt.pickup tupe...
You will see the jig off to one side of the Incra jig this gives the tube room to lock in the hole....just push it in place and you are set to suck up the chips.
It can be installed quick and easy by just removing the big black plastic wing and slip the Vac.pickup over the Incra jig.
====================