Hi Trap
Just my 2 cents,
I like it to the left and to the front just a bit,,, lets say if the top is 24" x 36 I would put it (from the center hole of the plate) 14" from the left side and 10" from the front side... this will let you add items like the Incra jig and give you a nice long fence if you want to use the 36" long fence or the short end for the OakPark add on jigs...plus if you off set the plate you can use the table from both sides like when you want to do some plywood panels....(dado slots on the table)
================= |