Router Forums - View Single Post - Cross Cutting Dado's On The Router Table...

**bobj3** · 07-12-2007, 12:09 AM

Hi Corey

Just thought of a way to doing without making a new jig, use the Incra, make a spacer block 1 1/2" set the block on the inside of the bit and next to the fence then set the Incra to the " 0 " on the gage now make one more gage block that's 1 3/4" wide move the side of the Incra back to the next spot and mark the gage...then write that number down...then all you need to do is move the fence back by that number to put in the new slots...1/4" slots by 3/16" deep should work I think...

Fire up your Colt and set it up bud...

================

07-12-2007, 12:09 AM	#4
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,256 View bobj3's Gallery	Report This Post! Hi Corey Just thought of a way to doing without making a new jig, use the Incra, make a spacer block 1 1/2" set the block on the inside of the bit and next to the fence then set the Incra to the " 0 " on the gage now make one more gage block that's 1 3/4" wide move the side of the Incra back to the next spot and mark the gage...then write that number down...then all you need to do is move the fence back by that number to put in the new slots...1/4" slots by 3/16" deep should work I think... Fire up your Colt and set it up bud... ================ __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 07-12-2007 at 12:11 AM.
	Top - Reply with Quote