Bobi3, I now hava a Canadian "Rona" router. It has only a "push to lock" shaft lock button that is small, hard to push and sharp on the edge. It has no flat spots on the shaft to use a second wrench. There is about 1 inch clearance to change a bit. It IS mounted to the Oak Park removable phenolic base plate. The slits in a 1/4" adapter bushing should be lined up withthe slits in the motor shaft to properly tighten a bit.
Router is still my name, I have a Bosch and it too has no flats on the shaft to use with a second wrench.
__________________
Bruce in the Peg
|