Router Forums - View Single Post

**bobj3** · 09-17-2007, 02:53 PM

Hi reikimaster

I had one like you now have , this is how I got around the mounting it to the work bench, I took off the front plate and drilled two holes in the back plate and used two 1/4" x 2 1/2" flat head wood, then made a wood plates out of 1/2" and 3/4" hardwood for both parts of the vise then screwed them in place and I also made a pair of sliding hardwood dogs for the front part of the vise...that would slide up to hold parts for hand plane work.

===========

09-17-2007, 02:53 PM	#5
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,081 View bobj3's Gallery	Report This Post! Hi reikimaster I had one like you now have , this is how I got around the mounting it to the work bench, I took off the front plate and drilled two holes in the back plate and used two 1/4" x 2 1/2" flat head wood, then made a wood plates out of 1/2" and 3/4" hardwood for both parts of the vise then screwed them in place and I also made a pair of sliding hardwood dogs for the front part of the vise...that would slide up to hold parts for hand plane work. =========== Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 09-21-2007 at 11:45 AM.
	Top - Reply with Quote