Hi SB
I use a two part Epoxy glue that can be injected in and under the laminate, you can get it from the auto parts store,, 30 sec.,1 min.5 min,etc.setup time..
I also use the super thick super glue with the spray that sets it in 10 sec. or less..the same stuff I use on wood joints when I don't want the glue to show and I don't want to wait for the glue to dry ..it's great stuff...
================
Quote:
|
Originally Posted by S Bolton Router table has a small area of plastic laminate lifting up near the router plate insert. I need to get a good glue that can be injected in a small area to try to glue the laminate back down. Contact cement won't work due to the small area.
Any ideas?
Many thanks in advance.
sb |