I will need to disagree Scott P.
Most buy stock 6" wide or less and if you buy anything wider it should be ripped down to less, most 6" wider stock will be cupped or will cup real quick once it's out of the stack.
I have not found a blade yet they that will not leave a saw mark in it when it's ripped on the table saw..
Most stock you will use will be less that 6" wide the norm for most projects or to say it should be, like for a panel doors,etc.
You need to start with sq. stock to get it to come out sq.
When I cut plywood I use the sand paper disk on the saw blade to remove the saw marks and it works OK most of the time...
But the jointer will make the stock flat and sq....
Just my 2 cents...
============
Quote:
|
Originally Posted by Joe Lyddon |