Router Forums - View Single Post

**bobj3** · 10-09-2007, 04:46 PM

Hi Alec

" Is oak hard to get through? " Yes, sometimes,,,

You maybe asking a bit to much from the bit...taking to much at one time.

Edging and slots are always hard to do in Oak because it's hard for the bit to move the chips out of the way and out of the slot and in turn they go around and around many times this will buld up heat and burn the stock..this can be true also when running a edge.

It 's always best to make small cuts ...in Oak, it takes a bit longer but it's quicker than trying to sand out the burn marks out..

=========

=========

10-09-2007, 04:46 PM	#3
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,306 View bobj3's Gallery	Report This Post! Hi Alec " Is oak hard to get through? " Yes, sometimes,,, You maybe asking a bit to much from the bit...taking to much at one time. Edging and slots are always hard to do in Oak because it's hard for the bit to move the chips out of the way and out of the slot and in turn they go around and around many times this will buld up heat and burn the stock..this can be true also when running a edge. It 's always best to make small cuts ...in Oak, it takes a bit longer but it's quicker than trying to sand out the burn marks out.. ========= ========= __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-09-2007 at 04:50 PM.
	Top - Reply with Quote