If the template calls for a 1/2" bit then I'm guessing that's what will match the radius of the insert's corners.
I have done the double-stick tape on wood strips arranged around the insert. It works, but if you have a nice table you really want to get it right the first time. I would make a template (you don't need to spend $40 to buy one). Make it out of 1/2" MDF or something. If you can make a template that fits your router plate, then you'll be able to get that insert location routed nicely onto your table.
Basically... making the template is like practicing to do the real thing, but you'll end up with a template that you can use again if you want. |