Hi dadsalmon
Thanks, I'm a cheap old SOB,, LOL
the 45deg.set up would be a easy on this sled just need to put in a 1/2 circle in the backuo block so it can swing into the 45 deg.spot..( both ways)
OR
The easy way is pick up one of the cheap miter gage for the table saw and just add the hold down clamps to the sled...and a longer backup board..
=============
Quote:
|
Originally Posted by dadsalmon Bop that's a nice job of that mitre using the OP basic idea. Been considering making some other mitres with different blocks to make it easier to get good results with 45 degree mitres and also might try to work something out for better accuracy with corner mitre lock joints. Rich |