Hi John
Just a BUTT in post...
You may want to use fiberglass resin, it's hard as a rock when it's setup..
you can also just a add a drop or two of food coloring to get it to match the top or the plate...
But just the resin not with the fiberglass,, just some masking tape and some cardboard and the resin....and you will have it done..you don't need that much just drop by the craft store or the auto parts store and pickup one of the small kits,,,comes in two parts and it's in plastic tubes, like JB...comes in 5sec.,20sec.,1 min.,5min.,30 mins.,and one hour type...
Use it on a test board to get the feel of it b/4 you use it on your top...
"bondo or JB" don't hold well and you know bondo it likes to chip off, JB weld will shrink just a bit and you will have a low spot..
fiberglass resin
http://www.fibreglast.com/showproduc...FQKHPAodu3m_IQ http://www.diseno-art.com/tutorials/fiberglass.html
==============
Quote:
|
Originally Posted by jcmmgm Steve, Do you think I can use something like bondo or JB weld to fill the voids in the corners and get them to the correct radius before routing the top? I've gone to a lot of trouble getting the top just how I want it and really don't want to mess it up now. Thank again. John. |