John, I agree with Rusty. When I used a template to set my plate I had to use a specific sized bushing and bit to get the correct radius on the corners. You might want to check on this before messing with fill-ins and maybe ruining the template. With a bushing it doesn't matter if the corners on the template are round or square you will still get the correct radius.
__________________
George
For those who haven't already done so...
PLEASE! PLEASE! Fill in your first name and location in your profile. I like to know who you are and where you are from. If you don't want me to know who you are, then I don't want to talk to you.
Last edited by curiousgeorge; 01-18-2008 at 11:50 AM.
|