Hi Falegname
You should be fine, sometimes you need to go against the grain but it's not the best way the norm
, I would suggest you to check the bit for damage..
Or maybe just sand off the 1/16" with your belt sander..
You can make a quick jig that holds the belt sander on it's side and a fence just like doing it on the router table or jointer...
Here's link to show you how to UPLOAD some pictures
http://www.routerforums.com/howattachment.php http://www.routerforums.com/help.php
========
Quote:
|
Originally Posted by Falegname I tried jointing with a router and a straight edge jig. The first board worked OK, but the second was a disaster. The router started ripping out chunks of wood and splintering the edge of the board. Here are the particulars:
Wood: poplar 7/8" thick
Bit: carbide, brand new 1/2 "straight bit, 1/2" shank, 1 1/2" cutting depth
Speed: 23,000 rpm
Depth of cut: 1/16"
Turns out I was going against the grain. Is that a no-no? Was I trying to move the router too fast? Would someone please try to tell me the error of my ways? Thanks.
I'd like to include pictures but don't know how to do it. Would some help me there? Again, thanks. |