Hi emtslug
"I was just wondering it if i needed to adjust anything on the dovetail jig, so i could just make though dados"
On one pair of the drawer parts you can put in though dados BUT on the other pair you will need to use the stop blocks way ( stop short ) ,,,,if not you will see the nasty slot after glue up..
The dovetail jig is made to put in the dovetails Not the dado slots that's just one more job that must be done with a diff.bit..
You can also use the drop and slot way on the router table but it must be done with care...
masking tape on the fence works well. just take a pencil and mark the start point and the stop point on the masking tape...
===============