Router Forums - View Single Post

**bobj3** · 04-17-2008, 06:06 PM

Hi Hat

I have one or two brass guides, here's a little trick I use when one will not stay locked in place ..

Take the ring nut and put some 60 grit sand paper on the work bench ( on some GLASS ) and rub the nut on the sand paper and do the same to the brass guide don't go over board with the sanding just ruff it up a bit , besure to do both sides on the ring nut....use a cross hatch pattern when you ruff it up....

============

04-17-2008, 06:06 PM	#2
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,306 View bobj3's Gallery	Report This Post! Hi Hat I have one or two brass guides, here's a little trick I use when one will not stay locked in place .. Take the ring nut and put some 60 grit sand paper on the work bench ( on some GLASS ) and rub the nut on the sand paper and do the same to the brass guide don't go over board with the sanding just ruff it up a bit , besure to do both sides on the ring nut....use a cross hatch pattern when you ruff it up.... ============ Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 04-18-2008 at 07:32 AM.
	Top - Reply with Quote