Hi Martin
I would suggest you make a new base plate, they are easy to make with a drill press all you need is some 1/4" thick plastic (clear) two Forstner Bits one that is 1 3/16" and one the is 1 3/8" ,I would suggest a square one 8" x 8" ,it's quicker to make and can be used in many diff. ways unlike a round one..
You have the bolt pattern to drill the mounting holes once you remove the one from the router you now have...
Then you can use the stardard brass guides that will stand up to many router jobs...
http://www.harborfreight.com/cpi/cta...emnumber=95160
You can also buy the bigger guides if you want 1 1/2" ID x 1 3/4" OD that will go up to 1 1/2" ID on the brass guide..unlike the norm of 1" ID..
http://www.leevalley.com/wood/page.a...000,51208&ap=1 http://www.leevalley.com/wood/page.a...000,51208&ap=1
=======
Quote:
|
Originally Posted by mjmpropman Hi guys
a quick question please . as some of you may know i have the above router with no accessories at all , am i right in thinking will all brushing guides fit into any craftsman router or do they vary from model to model.
I n my particular model the base plate re cease for the brushing guides to be secured into with the three counter sunk screws , the nearest i can measure is about 72-73mm is that the same on all craftsman routers ? |