You'er Welcome smokeyone
One more note the jig works great for making tentons ,sliding dovetails,blind dovetails,dado,etc. one pass on both sides then just flip the stock on it's edge and with a pass or two the tenton is done and it's a real clean job...without any saw marks...plus you can off set the tenton easy by just moving the bit up or down and with the brass setup bars, it's always right on the mark...the stock can be just about any size you want to use...from 1/4" thick to 4" thick stock..when you use a strait bit (1/2").
================
Quote:
|
Originally Posted by smokeyone Thanks for going to the trouble of showing the pictures. I get the idea now.
Another little project. |