Now I have another Question regarding the PC4210. It comes with a 7 Deg 17/32" Dia dovetail bit. Now the depth of cut is about 13/32", which is fine for 3/4" stock. When I use it on 1/2" stock, that only leaves about 3/32" between the edge of the tail and the front face of the drawer. Which structurally is probably fine, just not aesthetically pleasing. Can I just buy another bit say a 9 Deg 3/8" Dia who's depth of cut is about 3/8"
If I just pop that bit in will it work? Or will I need to make any other adjustments |