Quote:
|
Originally Posted by bobj3 Hi rstermer
I make most of the molding with my Horz.router table but I do use the other setup as well when I need 5" tall molding,,or short modling 1" tall ,pass the stock by the bit and both edges then rip it to size,on the tall stuff I use the Horz.router for the 1st. and the other setup for the 2nd pass it saves me time from playing with setup and bits... 
here's a snapshot of just some of the molding I made with the Vert.bits
========== |
Nice stuff, looks like you were using mdf. Do you think we should use mdf or pine for a painted ceiling molding? Also, do you think one Super Carbide bit will hold up for a run of 840' (420' of molding cut top and bottom = 840') or should we go with the MLCS bit? My thought is that as a newbie, with limited ability to make adjustments on the fly, once I get my setup done, I don't want to change ANYTHING (except cut depth) until I've run it all.
Thanks,
rstermer