Hi xmonday
Edge guides are easy to make your own, out of hardwood or plastic.
The plastic or hardwood will take on threaded holes or you can use a tee nut to lock the rods in place or thumb screws will do the job also.
You can also used threaded rod because it's just a bit under size after it's been threaded.
For the rods just buy some long 3/8" bolts, cut off the heads and threads and because most bolts now days have rolled threads on the them the rod is under size and should be just right for the holes in the router base...
Below you will see a quick and easy one you can make.
========
Last edited by bobj3; 05-14-2008 at 07:21 PM.
|