Quote:
Originally Posted by bobj3  Hi Evll
I'm not to sure what the SignCrafter by Milestone looks like BUT
This is for the
Milescraft 1206 SignCrafter Signmaking template kit with TurnLock
It's not you it's the jig  ,, It's a great jig BUT you will need to beef it up just a bit and do a bit of rework so you can use it...easy..
You will need to make some support blocks and some drop on blocks to keep the letters in place and drill some holes on the end parts...
I found out the best way is to use longer stock than you need for the sign then once you have the router job done cut off the waste.
========= |
Bob that IS the exact setup that I bought. Just the wrong name, sorry. What is the thickness of the blocks and supports that you made. It looks as though YOU have this all figured out. I ended up playing with the router freehand last night, just because I got tired of staring at in the box untouched. I really would like to use this stencil, (my freehand sucks) if you wouldn't mind post or emailing me the sizes I would REALLY APPRECIATE IT! Are they made out of hardboard? Luan? The spacers are a BIG issue, I was missing the left spacer when I received the kit. What is the deal with two turnlocks, (not 100% sure of the sizes) one was 5/8 and I think the other was 7/16. But the bit (included) only fit the 5/8 turnlock, BUT the 5/8 turnlock DIDN'T fit the smaller letters? I don't get it?
Cheers