Router Forums - View Single Post - Router

RustyW · 08-09-2008, 12:36 AM

I can't comment on the Triton because I've never seen one in person. But I do own the Hitachi M12V2. I removed the springs and hung it in a router table before plugging it in. It has worked flawlessly from day one and I use it quite a bit. I drilled a hole in my baseplate so I can adjust the height above the table. But the hole is usually full of sawdust so I just reach underneath(easy to adjust with no springs). I also bent the stock wrench to change bits above table. It's a big,bulky router that may be tough to handle handheld but it's been great in the table. If you have any specific questions feel free to PM me.

http://www.reconditionedsales.com/Routers___c362.aspx

I've not ordered from this place but they sure sell them cheap. And it looks like they ship to Canada.

08-09-2008, 12:36 AM	#4
RustyW Registered User Forum Geek Join Date: Dec 2005 Location: Oroville CA, USA First Name: Rusty Posts: 315 View RustyW's Gallery	Report This Post! I can't comment on the Triton because I've never seen one in person. But I do own the Hitachi M12V2. I removed the springs and hung it in a router table before plugging it in. It has worked flawlessly from day one and I use it quite a bit. I drilled a hole in my baseplate so I can adjust the height above the table. But the hole is usually full of sawdust so I just reach underneath(easy to adjust with no springs). I also bent the stock wrench to change bits above table. It's a big,bulky router that may be tough to handle handheld but it's been great in the table. If you have any specific questions feel free to PM me. http://www.reconditionedsales.com/Routers___c362.aspx I've not ordered from this place but they sure sell them cheap. And it looks like they ship to Canada. __________________ Rusty If You Want It Bad, You Get It Bad The Worse You Want It, The Worse You Get It
	Top - Reply with Quote