Quote:
Originally Posted by meldgaard  Hi
My Hitachi M12V2 is soon to be mounted in a WoodPecker Unilift in my new router table. Combined with an external power switch and a Xtreme Xtension for above the table bit changes I will be able to almost operate the router 'outside the box'.
But only almost since I still have to open the router table door and fumble my way in when I want to adjust the router speed. Anyone tried to wire their speedadjuster to the 'surface' of their table? |
Hi Meldgaard: I've just taken a look at the parts blowup of the M12V. There is another version the M12S. Compare the parts diagrams for the two routers and you'll see that the very top of the router is the difference between the two. It might be a simple fix but explore further before sticking your neck out.
M12SA parts breakdown
http://www.hitachi.us/Apps/hitachico...rTools/&nId=iD
M12V is still in their supported inventory. Find the parts and manual for it at Hitachi.us or your local version.
At this point, I'd call Customer Support at Hitachi and ask them how to do what you want. They're usually pretty helpful.
Hope this helps.
Allthunbs