Router Forums - View Single Post

g-man · 02-23-2005, 11:11 AM

Forget fancy vac attachments. Do what I did. I use my ShopVac. I bored a 1 1/2 inch hole in the top of my table. The hole is in line with the bit and about 5 inches to the left of the bit. Just make your vac hose fit in the hole. You could also glue a plastic fitting in that would accomodate the hose.My table is 1 1/2 inches thick so this is easy. My router is also bolted to the bottom of the table so I don't need a large plate that may interfere with the hole. Also check my message on the router razier back a few days ago.

g-man

02-23-2005, 11:11 AM	#4
g-man Registered User Dedicated Member Join Date: Sep 2004 Location: Wisconsin Posts: 47 View g-man's Gallery	Report This Post! Vac attachment? Forget fancy vac attachments. Do what I did. I use my ShopVac. I bored a 1 1/2 inch hole in the top of my table. The hole is in line with the bit and about 5 inches to the left of the bit. Just make your vac hose fit in the hole. You could also glue a plastic fitting in that would accomodate the hose.My table is 1 1/2 inches thick so this is easy. My router is also bolted to the bottom of the table so I don't need a large plate that may interfere with the hole. Also check my message on the router razier back a few days ago. g-man Last edited by g-man; 02-23-2005 at 11:14 AM. Reason: add more text
	Top - Reply with Quote