cranbrook2

Hi bob
I,ll have to check but i,m pretty sure we still have Sears here.
I will let you know the price if they do sell them here.

__________________
john in cranbrook ontario.
(plans)
www.extremebirdhouse.com

Advertising

bobj3

Please do John let me know BUT I think Sears as Locked the price

Bj

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

bobj3

Hi Corey

Well just a update on the 1/8" router bit, I got my extra ones in the mail Sat. and put one in the router table, all I can say is WOW,,,,

I said OK, lets test this baby out, so I got some 3/4" MDF stock out and put in a slot that was 5/8" deep, that should load the hell out of it, not so, it put in the slot just like cutting butter then I said OK lets see what it can do in some hardwood so I got some Oak,Maple,Walnut,Cherry about 14" long, now at this point I didn't want to break this great bit by playing with it so I pulled the bit down to 3/8" deep and ran all the types over the bit again I said WOW , then I said OK lets check the bit out, so I pulled the bit out and set it by the one of the other new ones and got the mike out and did a bit of checking and it was the same as the new ones, then I went over to the light with the big magnifying glass and took a good look at the bits and they looked the same. so to say I'm impress with this great bit in a big way.

I wanted to cut some 3/4" MDF on the router table but I said no, the bit will do that in the CarveWright machine , and I have used it for that in the machine but it takes the cut in small passes but it will cut up to 1" thick.

The machine will resize the board all at one time in the machine, it's kinda neat, the board moves forward by .005" and the bit comes down to make the cross cut or the rip cut and it's a clean cut and sq.to the pattern that it carved .

Bj

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Joe Lyddon

Bob, just curious... could those bits be used in a router too?!

... or do you think they wouldn't hold up due to not being able to take so small cuts at a time, etc.?

What do you think of the 1/16" bit? I've often wished I had a GOOD 1/16" bit I could play with on table tops & pic. frames...

bobj3

Hi Joe

Yes I think so , I do have a 1/16" bits but the shank is only 1/8" but I do have a Apt. so is can be use them in the router table but I don't think it would take it, I have bits the size of needles and they are also 1/8" but they break if I look at the them the wrong way.

http://www.grizzly.com/products/g7950

Bj

Attached Thumbnails

 

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

challagan

Sounds like one hell of a bit there Bob! Glad it worked out... so you just chucked it up in a 1/4 inch collet ?

Corey

__________________
My Carving Website: The Iowa Woodcarver
http://iowacarver.tripod.com/

My Shop Website - Woodshop 51503
http://woodshop51503.tripod.com/

bobj3

Hi Corey

" so you just chucked it up in a 1/4 inch collet ?" = more or less it comes in Adapter so it can just be dropped in the chuck on the Machine I had to take it out of the Adapter whitch takes a heat gun or a hair dryer to break the LockTite seal,,,, they put the bit in at the Mfg. with LockTite for the Allen Caps to hold it in place and the LockTite will slip into the hole for the bit and it locks the bit in place at the same time.

http://www.carvewright.com/pricing.html

Bj

Attached Thumbnails

 

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

bobj3

Just some more snapshots

Most are in MDF one of them is in Walnut,one in Part.Board,one in Cedar (fence wood)
they all have a key hole slot on the back side to hang them with if needed.

Bj

Attached Thumbnails

         

         

 

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

AxlMyk

Good gosh Bj.. When do you sleep?
Nice work.. Looks like you're having fun..

__________________
Mike - Retired FoMoCo Tradesman
My Gallery @ http://www.routerforums.com/axlmyks-stuff/

bobj3

Thanks Mike

"When do you sleep?" = like most when I can
"Looks like you're having fun", Yes, it's a fun toy , I thought it was going to be just one more router but it's not , it's so much fun it's hard to tell you how much it is , to see it on the computer then to make it and see it in real time
It's a great tool ...the next one I going to make is like the one below ▼ in Walnut.

Bj

Attached Thumbnails

 

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.