Register Now!

**harrysin** · 10-30-2007, 09:43 AM

Now that is just perfect Bj. even I can't fault it (and believe me I tried!)

**bobj3** · 10-30-2007, 10:19 AM

Hi Harry

Thanks,, I new you would and I took extra care just because of you Harry
LOL LOL..........

Cross all the T's and put all the dots in place hahahahahaha but I must say I did make one error and you didn't see it..and I thought you would see it but I'm not going to tell you where to look for it.. hahahahahahahaha ,, what the heck it's dot thing again...

===============

Quote:

Originally Posted by harrysin

Now that is just perfect Bj. even I can't fault it (and believe me I tried!)

**harrysin** · 10-30-2007, 10:29 AM

If it needs a microscope to see, it doesn't exist! It's a beauty.

**bobj3** · 10-30-2007, 02:36 PM

Just some more snapshots

This one is a Star Rosette small and large 2 3/4" and 3 1/2", it can also be used to make rosettes blocks for door frames, etc.

===========

DougO · 10-31-2007, 12:48 AM

bobj3, nice job but why not do this with your carvewright?

**bobj3** · 10-31-2007, 01:11 AM

Hi BlueGoose

Well ------let's see,,,, it's quicker,the carvewright can only do up to 14 1/2" wide,,and one of the patterns is 15 3/4 wide, it's not as loud with the standard router, it's easyer, the carvewright can't give me the clean look of the big router bit... the flame look..

All in all it's the speed I like..

once the frame holder is setup to take on the templates you can put one in place in about 5 mins. or less..

I think it's like having two hammers both can do the same job but one will do the job just right..

===========

**bobj3** · 11-03-2007, 11:47 AM

Hi BlueGoose

This is what it looks like when it's done on the carvewright machine

Note the center point....the machine takes it out or to say puts it in as a dimple..

see below

DougO · 11-03-2007, 02:15 PM

Looks very good to me - either way.

**bobj3** · 11-03-2007, 07:58 PM

Thanks BlueGoose

I also like the one the machine made so I made a jig (plug) for the 3D setup, one that will now put let me put in the dimple in the center just to get that finish look..,it's just a insert that has a 3/4" hole for a brass guide, so I can chuck up a 1/2" O.D. cove bit and drop it in and get the same look quick and easy...

had to make 2 , one for each size of Spanish Fan Templates....
========

Plus the start of a new box made out of 1/2" Walnut, this is the lid and the sides will be about the same...see below..

============

**challagan** · 11-03-2007, 08:33 PM

I guess I missed this Bj, that is really cool. Kind of produced a chip carved look. Very nice job!

Corey

10-30-2007, 09:43 AM	#21
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,323 View harrysin's Gallery	Report This Post! Now that is just perfect Bj. even I can't fault it (and believe me I tried!) __________________ *Harry*
	Top - Reply with Quote

10-30-2007, 10:29 AM	#23
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,323 View harrysin's Gallery	Report This Post! If it needs a microscope to see, it doesn't exist! It's a beauty. __________________ *Harry*
	Top - Reply with Quote

10-30-2007, 02:36 PM	#24
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,256 View bobj3's Gallery	Report This Post! Just some more snapshots This one is a Star Rosette small and large 2 3/4" and 3 1/2", it can also be used to make rosettes blocks for door frames, etc. =========== Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-30-2007 at 05:30 PM.
	Top - Reply with Quote

10-31-2007, 12:48 AM	#25
DougO Registered User Forum Fanatic Join Date: Jan 2006 Location: Mississippi Posts: 181 View DougO's Gallery	Report This Post! bobj3, nice job but why not do this with your carvewright?
	Top - Reply with Quote

10-31-2007, 01:11 AM	#26
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,256 View bobj3's Gallery	Report This Post! Hi BlueGoose Well ------let's see,,,, it's quicker,the carvewright can only do up to 14 1/2" wide,,and one of the patterns is 15 3/4 wide, it's not as loud with the standard router, it's easyer, the carvewright can't give me the clean look of the big router bit... the flame look.. All in all it's the speed I like.. once the frame holder is setup to take on the templates you can put one in place in about 5 mins. or less.. I think it's like having two hammers both can do the same job but one will do the job just right.. =========== __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-31-2007 at 09:55 AM.
	Top - Reply with Quote

11-03-2007, 11:47 AM	#27
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,256 View bobj3's Gallery	Report This Post! Hi BlueGoose This is what it looks like when it's done on the carvewright machine Note the center point....the machine takes it out or to say puts it in as a dimple.. see below Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 11-03-2007 at 11:58 AM.
	Top - Reply with Quote

11-03-2007, 02:15 PM	#28
DougO Registered User Forum Fanatic Join Date: Jan 2006 Location: Mississippi Posts: 181 View DougO's Gallery	Report This Post! Looks very good to me - either way.
	Top - Reply with Quote

11-03-2007, 07:58 PM	#29
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,256 View bobj3's Gallery	Report This Post! Thanks BlueGoose I also like the one the machine made so I made a jig (plug) for the 3D setup, one that will now put let me put in the dimple in the center just to get that finish look..,it's just a insert that has a 3/4" hole for a brass guide, so I can chuck up a 1/2" O.D. cove bit and drop it in and get the same look quick and easy... had to make 2 , one for each size of Spanish Fan Templates.... ======== Plus the start of a new box made out of 1/2" Walnut, this is the lid and the sides will be about the same...see below.. ============ Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 11-03-2007 at 08:14 PM.
	Top - Reply with Quote

11-03-2007, 08:33 PM	#30
challagan Retired Moderator Supreme Forum King Join Date: Feb 2006 Location: Iowa Posts: 4,002 View challagan's Gallery	Report This Post! I guess I missed this Bj, that is really cool. Kind of produced a chip carved look. Very nice job! Corey __________________ My Carving Website: The Iowa Woodcarver http://iowacarver.tripod.com/ My Shop Website - Woodshop 51503 http://woodshop51503.tripod.com/
	Top - Reply with Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mixing Bosch 1617 Router fixed base with Craftsman professional router	sf_basilix	Starting Off	5	01-21-2008 09:54 AM
Motorized Router Lift - Eagle Lake Style	johnwnixon	Table-mounted Routing	10	09-13-2007 07:59 AM
RouterForums.com and Oak-Park.com - September 2006 Contest - VOTING STAGE!!	Mark	Contests Archive	13	11-05-2006 03:23 AM
RouterForums.com and Oak-Park.com - September 2006 Contest!!	Mark	Contests Archive	72	10-01-2006 01:02 PM
New Router my way	reible	General Routing	14	06-10-2006 11:19 PM