Register Now!

**bobj3** · 10-20-2007, 10:11 AM

Hi Harry

All of them

, more than 100 bucks,,,I want to push the skis all I can and they do work so well

,,it's a out of site thing,, once it's out of site on the forum many may not see them and someone will ask what the heck is that thing for

To make the templates it would take a CNC machine to router them out, and a computer to lay it out,,, .001 stuff ,,,,, I don't know if they can be copied with trim bit but I don't think so ... most are 2 templates for each one and they must be fliped over about 12 to 16 times to get the job done...the fan takes about 24 filps and resets to get it done and they must all be right on the button every time, computer lay out stuff D:

BUT it's fun stuff, the Eagle is the easy one to do...great templates....

http://www.acetoolonline.com/CMT-3D-...tem-s/4402.htm

=========

**bobj3** · 10-22-2007, 01:51 PM

Just more snapshots

===========

**harrysin** · 10-23-2007, 02:46 AM

Having hands on experience with the 3D carver, I can truly say that you have done a terrific job Bj. I know only too well how easy it is to forget if each template has been flipped and turned, that is why we can all forgive you for missing two little dots!

templatetom · 10-23-2007, 06:55 AM

See bob
you can't get past old 'Eagle Eye' Harrysin (2 dots missing well when i had my first look I was unaware of the missing dots.
There is no doubt that this is the way to produce the subjects you have posted and with the correct tool for the job Thank you for posting the pics.
Tom

**challagan** · 10-23-2007, 08:31 AM

I missed that Bj, very cool! Nice one and thanks for the pics.

Corey

**bobj3** · 10-23-2007, 08:46 AM

Hi Harry

hahahahahahahaha
"missing two little dots" only you would see them

,,,I saw them after I took the snapshot and then I put the template back in place and got them in place but I don't know way I did that it's only a test junk board but getting it right is right I guess

I was so lazzy and cheap I didn't want to waste some stock for a test board so I just used what I had in the corner, it's a bit small but it took the hole pattern almost...

thanks Harry you always have a kind word and you have VERY sharp eyes.

============

Quote:

Originally Posted by harrysin

Having hands on experience with the 3D carver, I can truly say that you have done a terrific job Bj. I know only too well how easy it is to forget if each template has been flipped and turned, that is why we can all forgive you for missing two little dots!

**harrysin** · 10-23-2007, 09:42 AM

I'm developing sharp eyes in an attempt to catch up with you Bj. Isn't it nice to see Tom back after yet another holiday, teaching routing must pay well! I wonder what new diabolical problems he has in mind for us.

**bobj3** · 10-23-2007, 10:19 AM

Hi Harry

TOM ,,,, Yes it is

diabolical

1. Of, concerning, or characteristic of the devil; satanic.
2. Appropriate to a devil, especially in degree of wickedness or cruelty.

LOL hahahahahahaha LOL
We will see

==========

**bobj3** · 10-29-2007, 02:58 PM

Just some more 3D carvings

This one is a Small Spanish Fan, that I put in some new cabinet doors...

===============

Hamlin · 10-29-2007, 06:20 PM

Ok, now I'm jealous.

Excellent job Bob.

10-20-2007, 10:11 AM	#11
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,303 View bobj3's Gallery	Report This Post! Hi Harry All of them , more than 100 bucks,,,I want to push the skis all I can and they do work so well ,,it's a out of site thing,, once it's out of site on the forum many may not see them and someone will ask what the heck is that thing for To make the templates it would take a CNC machine to router them out, and a computer to lay it out,,, .001 stuff ,,,,, I don't know if they can be copied with trim bit but I don't think so ... most are 2 templates for each one and they must be fliped over about 12 to 16 times to get the job done...the fan takes about 24 filps and resets to get it done and they must all be right on the button every time, computer lay out stuff D: BUT it's fun stuff, the Eagle is the easy one to do...great templates.... http://www.acetoolonline.com/CMT-3D-...tem-s/4402.htm ========= __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-20-2007 at 11:20 PM.
	Top - Reply with Quote

10-22-2007, 01:51 PM	#12
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,303 View bobj3's Gallery	Report This Post! Just more snapshots =========== Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-22-2007 at 02:40 PM.
	Top - Reply with Quote

10-23-2007, 02:46 AM	#13
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,333 View harrysin's Gallery	Report This Post! Having hands on experience with the 3D carver, I can truly say that you have done a terrific job Bj. I know only too well how easy it is to forget if each template has been flipped and turned, that is why we can all forgive you for missing two little dots! __________________ *Harry*
	Top - Reply with Quote

10-23-2007, 06:55 AM	#14
templatetom Registered User Dedicated Member Join Date: Aug 2007 Posts: 39 View templatetom's Gallery	Report This Post! See bob you can't get past old 'Eagle Eye' Harrysin (2 dots missing well when i had my first look I was unaware of the missing dots. There is no doubt that this is the way to produce the subjects you have posted and with the correct tool for the job Thank you for posting the pics. Tom
	Top - Reply with Quote

10-23-2007, 08:31 AM	#15
challagan Retired Moderator Supreme Forum King Join Date: Feb 2006 Location: Iowa Posts: 4,002 View challagan's Gallery	Report This Post! I missed that Bj, very cool! Nice one and thanks for the pics. Corey __________________ My Carving Website: The Iowa Woodcarver http://iowacarver.tripod.com/ My Shop Website - Woodshop 51503 http://woodshop51503.tripod.com/
	Top - Reply with Quote

10-23-2007, 09:42 AM	#17
harrysin Forum Contributer Supreme Forum King Join Date: Jan 2007 Location: Western Australia Posts: 3,333 View harrysin's Gallery	Report This Post! I'm developing sharp eyes in an attempt to catch up with you Bj. Isn't it nice to see Tom back after yet another holiday, teaching routing must pay well! I wonder what new diabolical problems he has in mind for us. __________________ *Harry*
	Top - Reply with Quote

10-23-2007, 10:19 AM	#18
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,303 View bobj3's Gallery	Report This Post! Hi Harry TOM ,,,, Yes it is diabolical 1. Of, concerning, or characteristic of the devil; satanic. 2. Appropriate to a devil, especially in degree of wickedness or cruelty. LOL hahahahahahaha LOL We will see ========== __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J.
	Top - Reply with Quote

10-29-2007, 02:58 PM	#19
bobj3 Forum Contributer Supreme Forum King Join Date: Jan 2006 Location: Littleton,Colorado U.S.A. Posts: 8,303 View bobj3's Gallery	Report This Post! Just some more 3D carvings This one is a Small Spanish Fan, that I put in some new cabinet doors... =============== Attached Thumbnails __________________ PodCast videos RWS on YouTube http://www.routerforums.com/86898-post1.html Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables http://www.woodworkingonline.com/?s=dovetail Machine Cut ▼ http://www.woodworkingonline.com/200...cut-dovetails/ http://www.woodworkingonline.com/woo...podcast-store/ http://www.woodshopdemos.com/menu2.htm Bob J. Last edited by bobj3; 10-30-2007 at 12:23 PM.
	Top - Reply with Quote

10-29-2007, 06:20 PM	#20
Hamlin Registered User Supreme Forum King Join Date: Dec 2005 Location: Baldwin City, KS First Name: Ken Posts: 1,576 View Hamlin's Gallery	Report This Post! Ok, now I'm jealous. Excellent job Bob. __________________ Ken "A VETERAN" "Whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life". That is HONOR, and there are way too many people in this country who no longer understand it." -Author Unknown
	Top - Reply with Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mixing Bosch 1617 Router fixed base with Craftsman professional router	sf_basilix	Starting Off	5	01-21-2008 09:54 AM
Motorized Router Lift - Eagle Lake Style	johnwnixon	Table-mounted Routing	10	09-13-2007 07:59 AM
RouterForums.com and Oak-Park.com - September 2006 Contest - VOTING STAGE!!	Mark	Contests Archive	13	11-05-2006 03:23 AM
RouterForums.com and Oak-Park.com - September 2006 Contest!!	Mark	Contests Archive	72	10-01-2006 01:02 PM
New Router my way	reible	General Routing	14	06-10-2006 11:19 PM