aljonama

hi terry,

i have downloaded skype and installed, but how can i used that programm

thanks albert

Advertising

idigjars

Terry, awesome job! The signs look great, thank you for sharing the pics with us.

Paul

Visteonguy

Great,, ALbert,,,, I will get with Glennmore and see how to get ahold of ya,,, hahaha,, I am hardly the computer expert here,, so now I will now go to the big Kahona on talk ,,,,, I will get back with ya,,,

__________________
Terry

It seems like every where I go,,,,,,,,,,,,,,,,,,,,,,,,, there I am...

Visteonguy

Thanks Paul,,, they are a ton of fun to make and easy to do,,, sure gets you a lot of notice when ya get one done,,, Give her a shot, and show us what ya come up with.

__________________
Terry

It seems like every where I go,,,,,,,,,,,,,,,,,,,,,,,,, there I am...

Glenmore

Paul pm Terry with your your skype name and he can look it up and add you to his contacts. Then he will be able to call you and talk to you. And if you add skype to your profile here all that have skype can get into contact with you. Hope this helps you out.

__________________
Glenmore

Days without wood working are days not worth getting up for.

vagabon1

thanks for the input everyone i appreciate it.

aljonama

Hi Terry,

sorry fo so many question about signcarving from me, but a have big question:
Did You made a Router with Plate for friend before like this :

? If yes, i will send You Dollars for the Hardware and your Work. In Germany it's so stuppid to get the right Hardware. If You have no Time. no Problem

Thanks so much Albert

Attached Images

 

Visteonguy

Hi Albert, Glennmore showed me how to get your name on my contact list on Skype,, when you get a chance to go on there,,, we can chat and I can walk you though that plate,, its so easy to make,, nothing to it,,,

I have your name on my list now,, so when you are running skype, your name should light up on my screen,,

__________________
Terry

It seems like every where I go,,,,,,,,,,,,,,,,,,,,,,,,, there I am...

Rout-4-you

Hi Terry.....
Could you tell me ...what size Plexiglas, did you use for the router’s subbase.....and did you use the original screws that came with that trim router. I have the same router and man those screws are really small. any advise on this would be great.....thanks

Visteonguy

Sorry Rout4you, I missed your post,, I used a piece of Plexiglass 1/4 inch thick about 10 or 12 inches square. You remove the base plate that is on your router, and use that as a template to drill the holes in your new large base plate. Remember, you are NOT putting the original small base plate back on,, but replacing it with the new big plate,so you are not really much thicker then before. You have to counter bore the plate so the screw heads do not stick up above the surface of the new plate,, so the old screws, even though they are not very big, should work fine.

__________________
Terry

It seems like every where I go,,,,,,,,,,,,,,,,,,,,,,,,, there I am...