Register Now!

aquarium-builder · 01-04-2005, 05:33 PM

Hello... Does anyone have any idea where I can find information about or purchase a router base that will hold my router at a 45 to cove an INSIDE corner? Thanks!!

kp91 · 01-04-2005, 10:52 PM

I don't know if this is what you're looking for, but try Woodhaven's Angle ease
http://www.woodhaven.com/detail.aspx?ID=1252

"ANGLE-EASE™ - PATENT #6,742,558 - Owners Manual

DO MORE THAN YOU EVER IMAGINED BY TILTING YOUR ROUTER

Just imagine what you could do if you could tilt your router in the table. A roundover bit set at 45º makes a beaded edge, a core box bit makes drawer pulls and vertical panel bits cut beautiful moldings. Straight bits work for chamfering and stave construction. Slot cutters can groove the staves for a spline. All is right with the world! " or so they say!

Hope this helps

**Mike** · 01-05-2005, 01:18 PM

Doug, that is a neat design. But ouch on the price!
Aquarium builder, perhaps there is another way to get your cut than tilting the router? Can you describe what you are doing with dimensions? I am thinking of ball shaped optical cutters. They use these to shape lenses for eyeglasses. By making multiple passes you can cut about any curve you could want. I can dig up a picture if this would help.

reible · 01-05-2005, 10:04 PM

Are you doing a molding that you would normal use a coping saw to do a back cut for? If so I have never seen that done with a router especial if compound angles are involved. I could see a quarter round being cut that way in a corner but anything more than that would be a lot more effort to do then just doing it with a coping saw.

If someone does have a router method I'm very interested as well. I have a couple of rooms I'm redoing and hey I'm not to old to learn a new trick or two.....

Ed

reible · 01-05-2005, 10:06 PM

Quote:

Originally Posted by aniceone2hold

Doug, that is a neat design. But ouch on the price!
Aquarium builder, perhaps there is another way to get your cut than tilting the router? Can you describe what you are doing with dimensions? I am thinking of ball shaped optical cutters. They use these to shape lenses for eyeglasses. By making multiple passes you can cut about any curve you could want. I can dig up a picture if this would help.

I have seen a couple of your posts with the lens cutters mentioned how about a new thread and pictures, and maybe details on how us normal people might find these.

Ed

bmb in ab · 01-06-2005, 11:28 AM

Reible ... Try The Coper it is available at Windsor plywood.

I saw a demo of it and it looks pretty slick.

reible · 01-06-2005, 03:43 PM

Quote:

Originally Posted by bmb in ab

Reible ... Try The Coper it is available at Windsor plywood.

I saw a demo of it and it looks pretty slick.

WOW!

slick is right!

At least the baseboard molding is covered.......

Thanks for the url!

Ed

01-04-2005, 05:33 PM	#1
aquarium-builder Registered User Join Date: Jan 2005 Posts: 1 View aquarium-builder's Gallery	Report This Post! Help on Inside Corner Routing Hello... Does anyone have any idea where I can find information about or purchase a router base that will hold my router at a 45 to cove an INSIDE corner? Thanks!!
	Top - Reply with Quote

01-04-2005, 10:52 PM	#2
kp91 Marine Engineer Forum King Join Date: Sep 2004 Location: Fredericksburg, VA First Name: Doug Posts: 921 View kp91's Gallery	Report This Post! I don't know if this is what you're looking for, but try Woodhaven's Angle ease http://www.woodhaven.com/detail.aspx?ID=1252 "ANGLE-EASE™ - PATENT #6,742,558 - Owners Manual DO MORE THAN YOU EVER IMAGINED BY TILTING YOUR ROUTER Just imagine what you could do if you could tilt your router in the table. A roundover bit set at 45º makes a beaded edge, a core box bit makes drawer pulls and vertical panel bits cut beautiful moldings. Straight bits work for chamfering and stave construction. Slot cutters can groove the staves for a spline. All is right with the world! " or so they say! Hope this helps __________________ Doug 1 John 1:9
	Top - Reply with Quote

01-05-2005, 01:18 PM	#3
Mike Senior Moderator Supreme Forum King Join Date: Nov 2004 Location: Detroit, Michigan USA Posts: 3,378 View Mike's Gallery	Report This Post! Doug, that is a neat design. But ouch on the price! Aquarium builder, perhaps there is another way to get your cut than tilting the router? Can you describe what you are doing with dimensions? I am thinking of ball shaped optical cutters. They use these to shape lenses for eyeglasses. By making multiple passes you can cut about any curve you could want. I can dig up a picture if this would help. __________________ Mike Please edit your profile with a name and location so we can better assist you.
	Top - Reply with Quote

01-05-2005, 10:04 PM	#4
reible Registered User Supreme Forum King Join Date: Sep 2004 Posts: 1,703 View reible's Gallery	Report This Post! Are you doing a molding that you would normal use a coping saw to do a back cut for? If so I have never seen that done with a router especial if compound angles are involved. I could see a quarter round being cut that way in a corner but anything more than that would be a lot more effort to do then just doing it with a coping saw. If someone does have a router method I'm very interested as well. I have a couple of rooms I'm redoing and hey I'm not to old to learn a new trick or two..... Ed
	Top - Reply with Quote

01-06-2005, 11:28 AM	#6
bmb in ab Registered User Member Join Date: Sep 2004 Posts: 22 View bmb in ab's Gallery	Report This Post! Reible ... Try The Coper it is available at Windsor plywood. I saw a demo of it and it looks pretty slick.
	Top - Reply with Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Routing out inside of a 3/4 x 2 x 4	DavePowers	General Routing	5	04-14-2008 09:43 AM
Routing a decorative edge on the inside of a faceframe?	Woodworker 52	Portable Routing	2	01-29-2008 02:00 PM
Corner Radius	bobj3	Tools and Woodworking	25	09-29-2007 06:51 PM
Routing a decorative groove on an inside curve	HanDan	General Routing	2	03-15-2006 04:43 PM
Routing Template	Verlin Garrett	Jigs and Fixtures	5	02-06-2006 04:43 PM