Register Now!

hokenpoke · 02-06-2008, 11:59 AM

This seemed like info that should be easily available in the forum, but a search didn't turn up any results . . .

I would like to make a new sub for my PC 890 and since I have easy access to a waterjet, it seemed like an easy thing to do. Only thing is that I don't know what to program. So my questions are:

Where are the screws located in a PC base?
What ID and rebate diameter and depth do I use for a standard PC template guide?

Many thanks for any info you can provide

**bobj3** · 02-06-2008, 12:05 PM

Hi hokenpoke

The easy way is just pull off the one that's on the PC 890 now ( the black one) then you will have all you need to make a copy of it..

=========

Quote:

Originally Posted by hokenpoke

This seemed like info that should be easily available in the forum, but a search didn't turn up any results . . .

I would like to make a new sub for my PC 890 and since I have easy access to a waterjet, it seemed like an easy thing to do. Only thing is that I don't know what to program. So my questions are:

Where are the screws located in a PC base?
What ID and rebate diameter and depth do I use for a standard PC template guide?

Many thanks for any info you can provide

curiousgeorge · 02-06-2008, 12:44 PM

Hi, hokenpoke. Welcome to the forums.
Bj is correct. Just use the existing plate as a template and take all needed measurements from that.

BrianS · 02-07-2008, 12:51 AM

RustyW made one for his... Routerbase

02-06-2008, 11:59 AM	#1
hokenpoke Registered User Join Date: Feb 2008 Posts: 1 View hokenpoke's Gallery	Dimensions for PC base and guides? This seemed like info that should be easily available in the forum, but a search didn't turn up any results . . . I would like to make a new sub for my PC 890 and since I have easy access to a waterjet, it seemed like an easy thing to do. Only thing is that I don't know what to program. So my questions are: Where are the screws located in a PC base? What ID and rebate diameter and depth do I use for a standard PC template guide? Many thanks for any info you can provide
	Top - Reply with Quote

02-06-2008, 12:44 PM	#3
curiousgeorge Registered User Supreme Forum King Join Date: Nov 2006 Location: Fort Worth,Texas USA Posts: 1,345 View curiousgeorge's Gallery	Hi, hokenpoke. Welcome to the forums. Bj is correct. Just use the existing plate as a template and take all needed measurements from that. __________________ George If you can't fix it with a hammer, you've got an electrical problem...
	Top - Reply with Quote

02-07-2008, 12:51 AM	#4
BrianS Registered User Forum Geek Join Date: Nov 2004 Location: Windsor,Ontario Posts: 324 View BrianS's Gallery	RustyW made one for his... Routerbase __________________ A married man should forget his mistakes. There's no use in two people remembering the same thing!
	Top - Reply with Quote

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Make Your Own Sub Base For PC Guides	RustyW	Guide Bushings and Templates	8	09-19-2007 09:10 PM
40mm Guides for Templates + more	bobj3	Jigs and Fixtures	30	07-22-2007 11:09 PM
Model 320.17542 and table routing	trap	Table-mounted Routing	41	07-03-2007 11:37 AM
Hitachi M12V template guides?	vwmowery	General Routing	6	08-31-2006 11:51 PM
choosing a base plate ...	reikimaster	Table-mounted Routing	5	01-13-2006 10:37 PM

Sponsor Post
Advertising	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Router Forums

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)