Hamlin

Hi mftha,

The closest that OP has to a 4" opening is their plate used for large bits & raised panels. It has a 3 1/8" opening, unfortunetly, if you're wanting to get bushing guides that large, you'll have to machine them yourself or have a machine shop do them for you. Preferrably from brass stock.

Sad truth is, unless all State Senators are informed for the push to (as Harry calls it), "metrication". It won't happen. Thus how things are now, a mixed batch of metric & SAE sizes.

__________________
Ken

"A VETERAN"
"Whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life". That is HONOR, and there are way too many people in this country who no longer understand it." -Author Unknown

Advertising

bobj3

Hi Guys

Not to hard to make your own ,,,(bushing guides out of plastic that fit over the standard brass guides or to say on to the brass guides) and the one Harry and Tom like to use the 40mm one is showed in the link below...

http://www.routerforums.com/49128-post1.html

Just a note about the OP plate that has the unstardard 3 1/8" hole, it's not a big job to resize it to 3 3/4" hole so it can take on the stantard 3 1/2" panel bits...
Without the resize job you can't use many of the better panel bits that are 3" to 3 1/2"..in diam.


====

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Hamlin

Hi Bob,

Thanks for the tips there. I really like your sanding jig too!!

You by chance wouldn't have a pic or two of a "modified" OP plate?

__________________
Ken

"A VETERAN"
"Whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life". That is HONOR, and there are way too many people in this country who no longer understand it." -Author Unknown

bobj3

Hi Ken

Thanks and you'er welcome

Here's some shots of the reworked OP base plate..

======
I used the fly cutter below to open the size to 3 3/4"
Not a big job but it must be done on the drill press and clamped in place.

http://www.grizzly.com/products/Roun...et-3-pc-/H7537

===========

Attached Thumbnails

         

   

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Hamlin

Hi Bob,

Thanks, I think in the near future I'll be sending ya an email for some more help with this. I got a few other "irons in the fire" at the moment.

__________________
Ken

"A VETERAN"
"Whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life". That is HONOR, and there are way too many people in this country who no longer understand it." -Author Unknown

bobj3

Hi Ken

Ok please do, just ask... by the way one of the irons in the fire " wooden hinges" ???


=========

__________________
PodCast videos
RWS on YouTube

http://www.routerforums.com/86898-post1.html
Besure and click on the Up Arrow key ▲ on the Youtube video, you can select other youtube videos on router tables
http://www.woodworkingonline.com/?s=dovetail
Machine Cut ▼
http://www.woodworkingonline.com/200...cut-dovetails/

http://www.woodworkingonline.com/woo...podcast-store/

http://www.woodshopdemos.com/menu2.htm

Bob J.

Hamlin

Hi Bob,

Yuuup!! Already got a friend who wants me to build a small cedar chest, something like the size of 2' X 3'. Figure a 4" hinge "wood" work. LOL Not sure how deep to make it, prolly 18".

The problem for me right now is, finding the time, work seems to always interfere. But, gotta pay bills.

__________________
Ken

"A VETERAN"
"Whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life". That is HONOR, and there are way too many people in this country who no longer understand it." -Author Unknown